Hydraulic Oil in Bangladesh
SINO hydraulic oils support industrial hydraulic systems where the equipment manufacturer specifies the appropriate hydraulic-oil type and ISO viscosity grade. The current SINO range includes S.O Hydraulic AW and S.O HYDROIL HVI.
SINO products in this range
SINO S.O Hydraulic AW
Select the ISO VG required by the equipment manufacturer.
High-viscosity-index rangeSINO S.O HYDROIL HVI
Industrial hydraulic-fluid range for suitable hydraulic applications.
Always confirm the required viscosity grade and performance specification against the equipment or vehicle manufacturer’s recommendation before use.
Match hydraulic oil to the machine, not only the drum price.
Hydraulic systems depend on the correct fluid viscosity and application fit. Before selecting an oil, check the machine or pump manufacturer’s requirement, the specified ISO VG, operating temperature and service conditions. For industrial buyers, SINO can provide the relevant technical data sheet so the grade can be checked against the equipment requirement before supply.
Hydraulic grade, application and pack guide
ISO VG is a viscosity classification, not a quality ranking. A higher number does not automatically mean better protection. The correct grade depends on the pump, system design, operating temperature and equipment manufacturer’s recommendation. SINO S.O Hydraulic AW is available in ISO VG 32, 46, 68, 100 and 150 for industrial and mobile hydraulic applications where specified.
| Range / product | Grade / specification | Typical fit | Application note | Pack / supply |
|---|---|---|---|---|
| S.O Hydraulic AW | ISO VG 32 | Lower-viscosity option where the equipment specifies VG 32 | General industrial/mobile hydraulic systems where specified | 20 L · 205 L · or as required |
| S.O Hydraulic AW | ISO VG 46 | Mid-range viscosity where the equipment specifies VG 46 | Common hydraulic-system requirement; verify machine manual | 20 L · 205 L · or as required |
| S.O Hydraulic AW | ISO VG 68 | Higher-viscosity option where the equipment specifies VG 68 | Hydraulic systems specifically calling for VG 68 | 20 L · 205 L · or as required |
| S.O Hydraulic AW | ISO VG 100 | Equipment specifying ISO VG 100 | Select where the system requires this grade | 20 L · 205 L · or as required |
| S.O Hydraulic AW | ISO VG 150 | Equipment specifying ISO VG 150 | Select where the system requires this grade | 20 L · 205 L · or as required |
| S.O HYDROIL HVI | Confirm required ISO VG | High-viscosity-index hydraulic range | Applications requiring HVI hydraulic fluid | 20 L · 205 L · or as required |
Hydraulic presses, injection-moulding machines, machine tools, lifts and mobile hydraulic equipment can all use anti-wear hydraulic fluids, but the correct grade is machine-specific. Do not assign VG 32, 46 or 68 from the machine type alone. Check oil level, leaks, filter condition and signs of water or contamination as part of routine maintenance. Oil-change timing should follow the machine maker and, where used, oil-condition analysis—not an arbitrary calendar figure.
বাংলাদেশে হাইড্রলিক অয়েল নির্বাচন: ISO VG 32, 46 ও 68
হাইড্রলিক অয়েল বাছাই করার সময় ISO VG 32, 46 বা 68-কে “ভালো, আরও ভালো, সবচেয়ে ভালো” হিসেবে দেখা ঠিক নয়। Machine বা pump manufacturer যে viscosity grade চায়, সেটাই আগে মিলিয়ে নিন। Hydraulic press, injection moulding machine বা mobile hydraulic system—শুধু machine-এর নাম দেখে grade ঠিক করবেন না। SINO S.O Hydraulic AW এবং HYDROIL HVI-এর current pack information-এ ২০ লিটার, ২০৫ লিটার বা requirement অনুযায়ী supply দেখানো আছে।
Frequently asked questions
What do the ISO VG 32, 46, 68, 100 and 150 grades mean?
They are different viscosity grades. The correct grade depends on the hydraulic system, temperature and equipment manufacturer’s requirement; a higher number is not automatically better.
Where are anti-wear hydraulic oils commonly used?
They are commonly found in industrial and mobile hydraulic systems such as presses, moulding machines, machine tools and mobile equipment, where the OEM specifies a compatible anti-wear hydraulic fluid.
What pack sizes are shown for SINO hydraulic oils?
The current SINO Hydraulic AW and HYDROIL HVI product information lists 20 litres, 205 litres or supply as required.
How often should hydraulic oil be changed?
Follow the equipment manufacturer’s maintenance schedule and condition-monitoring practices. Contamination, water and oil condition can matter more than a generic calendar interval.
Can I switch from VG 46 to VG 68 because the machine runs hot?
Do not change viscosity solely on that assumption. Check the machine/OEM requirement and operating conditions before changing grade.